BHNM Series
BHNM Series Hydraulic Nuts
Max. Pressure | 100 MPa Stroke: 5-30 mm |
|---|
Overview
Max. Pressure: 100 MPa Stroke: 5-30 mm
Commonly used in bearings, flywheels, propellers and other
workpiece presses hydraulic tools. With the resulting top thrust is
smooth, no impact, the process does not hurt the workpiece and other
characteristics. Through the hydraulic nut inner thread, which can be installed in the shaft parts, the piston under
the action of 700bar hydraulic pressure to push the workpiece to the installation position.
